If you design your own paperback cover, you need the exact spine width. Too narrow and your text wraps onto the back cover. Too wide and it wraps onto the front. This guide gives you the formula and a quick chart for common page counts.
The formula
Spine width = page count × paper thickness per page.
KDP’s published thickness per page is about 0.002252 inches for white paper, 0.0025 inches for cream paper and 0.002347 inches for premium color paper.
Spine width chart
| Pages | White paper | Cream paper |
|---|---|---|
| 100 | 0.225 in | 0.250 in |
| 150 | 0.338 in | 0.375 in |
| 200 | 0.450 in | 0.500 in |
| 300 | 0.676 in | 0.750 in |
From spine to full cover
Your full cover width is two times the trim width, plus the spine, plus 0.25 inches of bleed. The height is the trim height plus 0.25 inches. For a 6 x 9 inch book with 200 white pages, that is 12 + 0.450 + 0.25 = 12.70 inches wide and 9.25 inches tall.
Should I put text on the spine?
Very thin spines are too narrow for readable text. KDP’s guidance is that spine text works best at about 79 pages or more. For thinner books, leave the spine blank or use a plain color.
Common mistakes
- Using the wrong paper type. Cream paper makes a wider spine.
- Changing the page count after the cover is finished.
- Placing text too close to the spine fold.
- Skipping KDP’s cover template check before upload.
Skip the math
Use the free Spine Width & Cover Size Calculator to get exact numbers for your book. Then check your earnings with the KDP Royalty Calculator, since page count also changes your printing cost.
FAQ
Does the spine width change if I add pages? Yes. Every added page widens the spine, so recalculate and update your cover.
Is the spine the same for black and color interiors? Premium color paper is slightly thicker per page than white, so the spine is a little wider.
Where do I find KDP’s official cover template? In your KDP account, in the paperback content section, after you enter your trim size and page count.